Water Saving Urinal Flush Valve Manufacturer

High Efficiency Urinal Toilet Flush Valve Supplier

Heavy Duty Urinal Flush Valve for Public Toilets

Reliable Urinal Toilet Valve with Fast Response

Commercial Urinal Flush Valve High Performance

Eco Friendly Urinal Flush Valve Manufacturer

Showing Slide 1 of 6

WL2862 Urinal Toilet Valve Manufacturer

A urinal toilet valve is an essential plumbing device. It is utilized to regulate the flow of water for flushing urinals. It ensures cleanliness, minimizes wastage of water, and ensures the free flow of water from urinals after every use. The device can be controlled manually, through sensors, or with the aid of a solenoid. Urinal toilet valves are installed in public places, offices, and factories. The device is useful as it is durable and ensures efficient performance. The installation of urinal toilet valves is essential for modern plumbing systems. The devices are critical for meeting sanitary demands, optimizing water consumption, and ensuring efficient flushing at various pressure levels.

Main Features of Urinal Toilet Valve

Urinal toilet valve has many important features that make these devices last longer and function better. These features include water savings as these valves control water flow and flushing properly. Quick response time ensures proper functioning as these devices turn on quickly. Low noise operation ensures greater comfort for users. Durable material ensures no rust and long life. Leak-proof sealing ensures water does not leak out. These devices can be controlled in many ways as well, such as manually or via a sensor or solenoid. Easy installation and maintenance make these devices cost-effective. These are perfect for areas where there is a lot of traffic and these devices are required to function properly all the time.

Get A Free Quote

PDF Download

A Brief Overview of Urinal Toilet Valve

The urinal toilet valve is a high-performance flushing control device designed specifically to be used in public and commercial bathroom areas. It is long-lasting, functions well, and is easy to use, making it very reliable. It is available in various forms, including manual, automatic, and solenoid-controlled. This means that it can be installed in various ways. It is long-lasting and made of materials that will not rust. This means that it will serve you for a very long time, even in harsh conditions. It is the best device to be used in modern bathroom sanitation due to its ability to function well, minimal maintenance requirements, and ability to work with other plumbing fixtures.

WL2862 Urinal Toilet Flush Valve Video

WL2862 automatic urinal flush valve supplier

Automatic Urinal Toilet Valve with Solenoid

Long Life Urinal Toilet Valve with Strong Seal

Water Efficient Urinal Toilet Valve System

Precision Urinal Toilet Valve Leak Free Design

Compact Urinal Flush Valve for Modern Toilets

WL2862 Urinal Toilet Flush Valve Datasheet

Product name:	Urinal Toilet Flush Solenoid Valve
Mode:	WL2862
Rated Voltage (V):	DC12v
type	Normally closed type
Response Time (ms)	on ≤ 0.15
Response Time (ms)	off ≤ 0.5
Working Pressure (Mpa)	0.02-0.8
Flow Characters	0.05 Mpa ≥ 12 L/min
	0.1MPa ≥ 17L/min
	0.8MPa ≥ 35L/ min
Medium Temperature(℃):	1-75
Media:	Water

Resistance (Ω):	27Ω±0.5
Lifespan (times):	≥ 500 000
Application:	Bathroom Water Flush Valve, vegetable irrigation valve, etc.
Material:	Stainless Threads, POM, and Brass Solenoid

WL2862 Urinal Toilet Valve Application

In many places where hygiene, efficiency, and strength are significant considerations, urinal-toilet valves are extremely common. These are often used in hotels, airports, malls, schools, hospitals, and industrial establishments. These valves are used to ensure proper and consistent toilet flushing in public restrooms. This is important for maintaining hygiene and sanitation standards.

The smart technology used in many buildings now involves sensor-operated urinal valves that do not require manual operation. This keeps the building clean and prevents the spread of diseases. These are suitable for eco-friendly projects and green buildings as they save water, which is a top priority for them.

Industrial or heavy-duty urinal valves are suitable for industrial or commercial establishments, as they can withstand high pressure and are used frequently. These are highly popular for renovation projects, as these can easily be integrated into existing plumbing systems.

Overall, urinal and toilet valves are extremely important for the infrastructure of contemporary restrooms, as these play a vital role in water control, user satisfaction, and eco-friendliness.

Advantages and Disadvantages of Urinal Toilet Valve

Benefits of a Urinal Toilet Valve
1. Saving Water

Modern urinal valves, especially those that work with sensors, are made to use the right amount of water for each flush. Compared to flushing by hand, the system wastes less water.

2. Better hygiene

Automatic (sensor-based) valves get rid of the need for physical contact, which cuts down on the spread of bacteria and makes the bathroom cleaner overall.

3. Flushing that works every time

These valves deliver the same amount of water every time, unlike manual flushing, which makes sure the urinal bowl is cleaned properly.

4. Less Mistakes by People

People often forget to flush or don’t flush enough. A urinal valve makes sure that flushing happens every time, especially with automatic systems.

5. Strong enough for busy areas

Commercial-grade urinal valves are made to last, so they work well in public restrooms, malls, airports, and offices.

6. Flush settings that can be changed

Some more advanced models let you change how long the flush lasts and how much water flows, which can help improve performance and save water.

❌ Problems with a Urinal Toilet Valve
1. More expensive at first

Urinal valves that work automatically or with sensors cost more than manual ones because they have electronics and sensors.

2. What needs to be done to keep it running
Sensors may stop working or need to be calibrated.
Over time, internal parts like diaphragms or solenoids can wear out.
3. Dependence on Power

Sensor valves need batteries or wires to work. If there aren’t any backup systems in place, a power failure can stop things from working.

4. How hard it is to install

Automatic systems might need:

Wiring for electricity
Installation by a pro
5. Possible Water Waste (if not set up right)

Settings that aren’t right or sensors that don’t work right can cause:

Too much flushing
Water that runs all the time
6. Problems with Sensitivity

Sensors could:

Trigger for no reason (false flush)
Not able to properly detect users in some settings

Troubleshooting Guide for Urinal Toilet Valves

1. No Water Flow

Possible Reasons:

The water supply is off.

The filter at the inlet is clogged.

There is not enough water pressure.

Answers:

Open the water supply valve.

Change the filter at the inlet.

Make sure the water pressure is high enough.

2. Water is always flowing; it won’t stop

Possible Reasons:

The diaphragm or seal is worn or broken.

Stuff is stuck in the valve.

The solenoid is broken (for the automatic type).

Answers:

Change the diaphragm or seal.

Take apart the valve and clean the inside.

Check the solenoid; change it if necessary.

3. Flushing is not strong enough or is improper

Insufficient water pressure

Setting the flow regulator too low

Partially clogged pipeline

Answers:

If possible, increase the water pressure.

Change the flow control

Check the pipeline

4 Leakage Around the Valve

Possible Reasons:

Connections are loose

O-ring is broken

The valve body is cracked

Answers:

Make sure all connections are tight

Change O-rings

Change valve

5. Sensor Not Working (Automatic)

Possible Reasons:

No power or dead batteries

The sensor lens is clogged

The sensor module is broken

Answers:

Make sure batteries are working

Clean sensor surface

Change sensor

6. Shut-Off After a Delay

Possible Reasons:

Objects obstructing movement inside

Bad control

Does not calibrate

Answers:

Clean the parts inside

Change control

Change bad parts

7. Loud Operation

Possible Reasons:

Too high water pressure

Vibrations inside

Parts loose

Answers:

Install pressure regulator

Make sure the parts inside are tight

8. Slow response or no activation

Possible Reasons:

Electrical connection bad (solenoid type)

The sensor signal is weak

Wear and tear on machine

Answers:

Check electrical connections.

Change sensor

Change bad parts

Tips for Buyers on How to Take Care of Their Things

To keep it from getting clogged, clean the filter at the inlet.

Check the seals and diaphragms at times

In order to avoid the accumulation of debris, it is recommended that you should utilize a clean water supply.

Every 3-6 months, as part of your routine maintenance

FAQs Of Urinal Toilet Valve

1. What is the urinal toilet valve ?

The urinal toilet valve is an apparatus that regulates the water used in flushing the toilets. It ensures that water is utilized in the best way possible while at the same time maintaining cleanliness in the toilets.

2. What types of urinal toilet valves can be used in the urinal toilet?

There are three types of valves used in the urinal toilet.

Manual push-button type

Automatic type with sensors

Electrical system with solenoid control type

3. What is the purpose of the urinal toilet valve?

The purpose of the valve is that when it is switched on, water is able to pass through the urinal toilet. After some time passes, it is then switched off to stop the water flow.

4. Does the Urinal Toilet valve used in the urinal toilet assist in the saving of water?

Yes, they use a lot less water because they have flow control and timed flushing.

5. What materials do people usually use in making the Urinal Toilet Valve ??

Mostly, urinal valves are made from:

Brass – because it lasts a long time and does not rust

Engineering plastic—because it saves money and makes things lighter

6. How long does a Urinal toilet valve for a urinal last?

Depending on the use and the quality of the valve, it can last 3 to 5 years or more than 500,000 cycles.

7. Is it hard to put the Urinal Toilet Valve together?

No, urinal valves are easy to assemble and use standard plumbing connections. This saves time and money.

8. How do I take care of the valve in a urinal toilet?

Regularly, the valve in the urinal toilet must be maintained by:

Cleaning the filter at the entrance

Inspecting the seals and gaskets

Checking for leaks or things blocking the leaks

How to Choose the Urinal Toilet Valve?

Choosing the right urinal toilet valve is critical to guarantee that it functions well and lasts long. It should be able to use minimal water while flushing effectively. It should be able to work with other plumbing fixtures. Choosing the right device is important to ensure that it functions well and lasts long. Consider the type of control mechanism you will use. You have the option to choose either a manually controlled, sensor-controlled, or solenoid-controlled device. Sensor-controlled devices are important and useful, especially in public bathroom areas where cleanliness and the absence of contact with other surfaces is important.

Another important consideration is the range of water pressure. This is especially important if you are installing it in an area where the pressure is likely to be high. Choosing the right device is essential for consistent operation and to ensure that the flushing mechanism works reliably every time. This device must be able to function well even at low and high pressure. This is important to ensure that the device is able to function effectively and efficiently. Choosing the right material is very important. This is especially important to ensure that the device is long-lasting and functions well. Brass is very strong and will not corrode easily. Engineering plastic is also an important material and is cheaper.

Another factor is whether it can work well with the plumbing systems that have already been installed. This includes checking the size of the installation, thread type, and connection type so that additional costs are not incurred. Also, the valve must be able to work well with sensor systems, which are part of smart building technology.

Lastly, the ability of the supplier is another factor to be considered. This includes checking their quality certificates, their ability to make things, and their after-sales support. A reliable supplier is one that can ensure the quality of their products is consistent, delivered on time, and can provide support when needed.

After analyzing these factors, buyers can make the best choice on which urinal toilet valve is the best based on their balance of quality, performance, and price.